SRA Fast Chip Kit for SMD Removal - 2cc Flux 820mm Alloy - Lead-Free Soldering

Description

Browse Shop
About Us
Feedback
Contact
Part No |
SC-SRA-FC-SMD-KIT-LF
SRA Fast Chip Kit for SMD Removal - 2cc Flux 820mm Alloy - Lead-Free Soldering
Ask Question
Save Seller
SHORT DESCRIPTION
The Fast Chip Removal Kit is a lead-free, quick, and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
FULL UK SUPPORT
We offer full UK support on all the products we sell. Please feel free Contact us by phone or email if you have any queries regarding our products
SAME DAY DISPATCH
Same day despatch on all items ordered before 15:00 GMT
Description
The Fast Chip SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
Removes QFP's, PLCC's, SOIC's, and chip components under 149 degreesC (300 degreesF)
Kit Contents: 823mm (2.7') Fast Chip Removal Alloy, one 2cc tube of SRA TF5000 No Clean Rework Paste Flux and complete instructions for SMD Removal and Cleanup
Enough material to remove 8-10 SMD's
Lead-free alternative for SC-SRA-FC-SMD-KIT
Made in the USA
The heart of the kit is the length of the Fast Chip low-temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (57.7°C / 136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component.
Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low-temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.
SRA Soldering products have made a name for themselves in America for being affordable, quality products that are all made in the USA.
For further product information please feel free to contact us
About us
The Allendale Group Ltd was founded in 2003 and now operate from over 30,000 sq. feet of warehouse space in Hoddesdon, UK and Hangzhou, China.
A British company, owned and run by a group of electronic and mechanically minded engineers, sourcing and developing product from all over the world, ensuring we can offer competitive prices and the latest technology on the market.
Ebay links
Our Store
Other Items
Feedback
Send message
The heart of the kit is the length of the Fast Chip low-temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (57.7°C / 136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low-temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place. A British com
The heart of the kit is the length of the Fast Chip low-temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (57.7°C / 136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low-temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place. A British com
The heart of the kit is the length of the Fast Chip low-temperature removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (57.7°C / 136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low-temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place. A British com