JILONG KL6200 OTDR SM 1310/1550nm OrienTek T49 Fusion Splicer FTTH Tools Kit

Description

JILONG KL6200 OTDR SM 1310/1550nm OrienTek T49 Fusion Splicer FTTH Tools Kit
Features：
1
，
World’s most compact, Lightweight and Fast Design
2
，
Stable aerial operation Design
2
，
Auto Splice & Auto Heat
Function
3
，
Compatible with Fusion Splice-On Connector (FSOC)
4
，
Tool-less Electrodes replacement
5
，
Extended-life electrodes, 5,000 splices (replaceable)
6，
3-Year Extended Warranty
Applications：
1，FTTx network installation
2，Field termination with splice-on connectors
3，Access network installation
4，Distribution fiber repair
5，Fanout kits, pigtails and splice cassettes
Splice Method :
Active Clad-Alignment
Applicable Fibers :
SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)
Compatible Fiber/Cable :
0.25~3.0 mm / indoor cable
Fiber Holder :
Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional))
Fiber Diameter :
Cladding: 80-150μm，Coating: 100~1000μm
Fiber Cleave Length :
8~16 mm
Splice mode :
Max 128 modes
Typical Splice Loss :
SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB
★①
Return Loss :
>>60dB
Splicing Time :
SM Quick mode : 8 sec / SM Average: 10 Sec.
Estimated Splice Loss :
Available
Heating Time :
Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable
Protection Sleeve Length :
20mm, 30mm, 40mm, 50mm, 60mm
Heat Programs:
Max 32 modes
Battery :
3400mAh Battery Capacity, Typical 120 Cycles (Splice&Heat) per Charge
★②
Electrode Life :
5000 arcs
（
replaceable
）
★③
Auto-start :
Splice / Heating
Automatic Fiber Identification :
/
Automatic ARC Identification :
Automatic arc calibration by air pressure and temperature
Results Storage :
The last 10,000 splice records and 2,000 result images
Tension Test :
1.96~2.25N
Operating Condition :
Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s
Storage Condition :
0~95% relative humidity, -20~60°C
Display :
3.5” color high resolution (800 x 480) display
Fiber Magnification :
X, Y, XY, X/Y : 320X Magnification
Power Supply :
AC Input 100-240V, DC Input 9-14V
Terminal :
USB2.0
Weight :
1.06kg without battery / 1.35kg with battery
Size :
130H x 113W x 126D mm
JILONG KL-6200 OTDR SM 1310/1550nm Bult-in OPM、SLS、VFL、RJ45
1,
Much more than an OTDR，
Built-in OPM/VFL/VLS/FIP/RJ45;
2,
First-in-class OTDR Self calibration ;
3,
1m
short event dead zone;
4,
Link map
and Pass/Fail judgement function;
5,
Best-in-Class Trace Analysis Software on PC;
6,
Dual wavelengths testing simultaneously;
7,
3-Year
Warranty
8.
Max. Distance ：
140KM@1550nm, 89KM@1310nm
OTDR Specifications
Model
KL-6200-S
Wavelength (nm)
SM 1310/1550
Dynamic range
(dB)
32/30
Number of optical port
1
Applicable fiber
SM (ITU-T G.652)
Distance range (km)
0.5,1,2,5,10,20,35,50,75,100,150,200
Pulse width (ns)
5,10,20,50,100,200,500,1000,2000,10000,20000
Event dead zone
*1
(m)
1
Attenuation dead zone
*2
(m)
3.5
Number of sampling points
Max.80000
Sampling resolution
Min. 0.04m
Distance measurement accuracy
±(0.75 m + Measurement distance × 2 × 10
−5
+ Sampling resolution)
Loss measurement accuracy
±0.03 dB/dB
Return loss measurement accuracy
±2 dB
Optical Power Meter Module (Built-in)
Available
OPM
Wavelength setting
800 ~ 1650nm
Power range
-70 ~ +6dBm
Measure accuracy
＜（
±0.2dB or ±5%
）
Display resolution
0.01dB
Optical input port
SC/UPC + 2.5mm Universal Ferrule
Stabilized Light Source Module (Built-in)
Available
SLS
Wavelength (nm)
1310/1550
Output power
≥-10dBm
Modulation mode
CW, 270 Hz, 1 kHz, 2 kHz
Laser class
Class 1M or Class 1
Optical input port
OTDR port
Visual Fault Locator Module (Built-in)
Available
VFL
Wavelength (nm)
650
Output power
10mW
Modulation mode
CW, CHOP (Approx. 2 Hz)
Laser class
Class 3R
Optical input port
2.5 mm Universal ferrule type
Fiber Inspection Probe (Built-in)
Available
FIP
Magnification
250X
Resolution(um)
≥1.0
Electrical interface
USB2.0
Optical Connector
FC/UPC,SC/UPC,ST/UPC
Sensor
1/3 inch
RJ45 Networks Test (Built-in)
Available
RJ45
Wavelength (nm)
CAT5, CAT6
Distance of Cable Collationl:
300m
Distance of emitting signal:
300m
General Specifications
Link Map
Available
Pass/Fail judgment
Available
Distance unit
m, km, mile, kf
PC Analysis Software
Available
Languages
English, Español, Chinese, Português, Français, Русский
Optical connector
SC/UPC (FC/UPC,ST/UPC,LC/UP is Optional)
Display
3.5-inch color TFT LCD (Resolution: 640 × 480)
Electrical interface
Charge port × 1, USB 2.0 × 3, RJ45 × 2
Operating temperature
-10 ~ 50˚C (0 ~ 40°C when AC adapter is being used. 0 to 35˚C when battery is be charged)
Storage temperature
-20 to 60˚C
Altitude
4000 m
Humidity
0 to 90% RH (20 to 90% with 739874 AC adapter, non-condensing)
Power requirements
100 to 240VAC, 50/60Hz (AC adapter)
Battery
3000mAh
LED Light illumination
≥15000mcd
Operating time*3
5 hours
Data storage
Internal storage: ≥1000 waveforms, External storage: USB memory
Dimensions
Approx. 118 mm (W) × 218 mm (H) × 55 mm (D)
Weight
Approx. 0.73 kg (including internal battery and protectors, excluding OTDR unit and options)