JDSU T-Berd 5800 V2 4146 QUAD SM MM Fiber OTDR & 1G Gigabit Ethernet Tester

Description

ebay template
The Following Items Are Included:
JDSU T-BERD 5800 V2 5822P Network Tester w/ Options (BC# 36124-L/T*)
Ethernet Interface Options:
C510M1GE: 10/100/1000M Electrical & 1GigE Optical Ethernet
Additional Ethernet Options:
C5COS: Multiple Streams/COS
C5IPV6: Ethernet IPv6
C5LSLAYER4: 10/100/1000M & 1 GigE L4 TCP/UDP
C5ETHSOAM: Ethernet Service And Link Layer OAM
C5LSCAPTURE: 10/100/1000M & 1GigE Packet Capture
C5JPROOF: J-Proof Layer 2 Transparency
C5LSJProfiler
CPRI Interface Options:
C5614MCPRI: 614.4M CPRI
C512GCPRI: 1228.8M CPRI
C524GCPRI: 2457.6M CPRI
C53GCPRI: 3072.0M CPRI
C549GCPRI: 4915.2M CPRI
C561GCPRI: 6144.0M CPRI
C598GCPRI: 9830.4M CPRI
Additional Options:
C5DUALPORT: Dual Port
C5BT: Bluetooth
C5WIFI: Wi-Fi
JDSU 4146 SM MM QUAD OTDR Module (BC# 36125)
SM Wavelengths:
1310nm
1550nm
LC Connector For SM Source
MM Wavelengths:
850nm
1300nm
SC Connector For MM Source
Finisar FTLF1319P18TL Transceiver-1310nm
Avago AFBR-57M5APZ Transceiver-850nm
(2) Ethernet Cables
(2) BNC Cables
(2) MM SC-SC Fiber Cables
(2) SM LC-LC Fiber Cables
MM LC-LC Duplex Fiber Cable
SM LC-LC Duplex Fiber Cable
Stylus
AC Adapter/Charger
Power Cord
User Manual On CD-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
JDSU T-BERD 5800 5822P V2 Handheld Network Tester w/ JDSU 4146 QUAD SM MM OTDR Module (850/130/1310/1550nm)
Ethernet Interface Options:
- C510M1GE: 10/100/1000M Electrical & 1GigE Optical Ethernet
Additional Ethernet Options:
- C5COS: Multiple Streams/COS
- C5IPV6: Ethernet IPv6
- C5LSLAYER4: 10/100/1000M & 1 GigE L4 TCP/UDP
- C5ETHSOAM: Ethernet Service And Link Layer OAM
- C5LSCAPTURE: 10/100/1000M & 1GigE Packet Capture
- C5JPROOF: J-Proof Layer 2 Transparency
- C5LSJProfiler
CPRI Interface Options:
- C5614MCPRI: 614.4M CPRI
- C512GCPRI: 1228.8M CPRI
- C524GCPRI: 2457.6M CPRI
- C53GCPRI: 3072.0M CPRI
- C549GCPRI: 4915.2M CPRI
- C561GCPRI: 6144.0M CPRI
- C598GCPRI: 9830.4M CPRI
Additional Options:
- C5DUALPORT: Dual Port
- C5BT: Bluetooth
- C5WIFI: Wi-Fi
The T-BERD 5800 supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
JDSU T-BERD 5800 Network Tester
The T-BERD/MTS-5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations.
The industry’s smallest handheld instrument can test throughout the service life cycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.
All-in-One Handheld Tool
The configurable T-BERD/MTS-5800 is the industry’s smallest dual port handheld instrument for Ethernet, SONET, SDH, OTN, Fibre Channel, and CPRI/OBSAI testing:
All test interfaces are readily available
Compact form factor for easy portability: 7 x 9.5 x 3 in (17.8 x 24.1 x 7.62 cm)
Large 7 in multi-touch display
Tablet-like interface for easy navigation through test information and advanced workflows
Integrated WiFi and Bluetooth lets you easily connect test sets and offload results
Compatible with JDSU Fiber Test Tools
Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument. The T-BERD/MTS-5800 is compatible with:
The P5000i fiber microscope for connector end-face inspection and analysis
MP-Series optical power meters for optical power and loss measurements
OTDR modules for fiber link characterization and fault finding
Smart Link Mapper optical analysis software that displays OTDR results in a simple, icon-based map view for clear diagnostics of detected issues
Optimized for Easy Field Use
Fixed test interfaces eliminate loose pluggable modules
LEDs indicate plug-ins for tests
A streamlined user interface provides simple pass/fail, green/red results
Extended battery life enables longer test times
Boots up rapidly from power-on to test start
Dual-port operation runs two tests simultaneously
TrueSAM Saves Valuable Service Activation Time
Test better and quicker with automated tests combined into one ultimate installation tool:
J-QuickCheck
A fast, automated test (RFC 2544, Y.1564) for validating end-to-end and auto-negotiation configuration
Y.1564 SAMComplete
An automated service verification test that speeds the installation of multiple classes of services (COS)
TrueSpeed per RFC 6349
An automated, standards-based test that can save up to 25% of operating expenses (OpEx) and reveals the reason for slow file downloads, eliminating finger-pointing
Reduce Mean Time to Repair for Network Problems
Reduce CapEx/OpEx while immediately identifying problems with automated tests — without the need for a field expert or a separate analyzer.
Network discovery automatically identifies equipment present on the network
J-Profiler discovers live traffic streams for real-time troubleshooting with in-service top-talkers analysis
Integrated capture/decode offers 10 G line rate packet capture and analysis in a handheld
J-Mentor provides expert troubleshooting guidance and interprets packet decodes
Enables Network Evolution — Today and Tomorrow
The 5800 meets leading-edge, carrier-grade Ethernet requirements:
Ensures reliability with link and service OAM (IEEE 802.3ah, 802.1ag, and ITU-T Y.1731)
Validates network scalability with VLAN, Q-in-Q, MAC-in-MAC, MPLS, and VPLS tunnelling technologies
Support for ODU multiplexing including ODU1, ODU0, and ODUflex
Test Ethernet over SONET/SDH with VCAT, LCAS, and GFP
Full-featured VoIP and IP video turn-up and troubleshooting tests
Supports packet transport network (PTN) evolution with MPLS-TP technology
Empower Cell-Site Technicians
T-BERD/MTS-5800 tools let cell-site technicians efficiently install and maintain backhaul and fronthaul networks. They can ensure BBU and RRH connectivity with CPRI and OBSAI tests:
Validate C-RAN connectivity across CWDM networks
Test RRH health from the bottom of the tower by emulating a BBU
Gain crucial visibility into system health with monitoring and inline access
And, they can verify network synchronization:
Emulate a 1588v2 master clock/slave recovery for proper point-to-point (PTP) message propagation and packet-delay variation (PDV) verification
Verify SyncE frequency synchronization accuracy and Ethernet synchronization message channel (ESMC) message propagation
Measure wander on SyncE, 1PPS, T1, E1, and 2 and 10 MHz signals
When equipped with an OTDR module, the T-BERD/MTS-5800 is the perfect solution for mobile network testing, providing easy fibre link characterization and troubleshooting
Features:
Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™ TCP throughput testing
Compatible with JDSU 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters
5822P Specifications:
Physical
Height
17.78 cm (7 in)
Width
24.13 cm (9.5 in)
Depth
7.62 cm (3 in)
Weight
1.9 kg (4.2 lb)
Power
Operating time
Up to 4 hours (depending on type of test)
Charging time
Approximately 7 hours from empty
Unit power input
12 VDC, 60 W Max
Power supply input
100 to 240 VAC, 50/60 Hz, autosensing
Power supply output
12 VDC, 5 AMP Max
Environmental
Operating temperature
0 to 50°C
Operating humidity
10–90% RH noncondensing
Storage temperature
–20 to 60°C
Storage humidity
10–95% RH noncondensing
Shock/Drop/Vibe
Shock
Drop
Vibration
per IEC 68-2-27 and 68-2-29 Ed. 2.0
per IEC 721-3-7 2nd Ed. /IEC 61010-1
per IEC 68-2-6 and MIL-PRF-28800F (Class 2)
General
Touch screen
7-inch LCD Resolution 1200x600 high visibility
Storage and I/O Interfaces Internal Memory Ports
Minimum of 1G (thousands of reports) 2x USB 2.0, 1x RJ45 Ethernet, 1x serial RS-232, 1x Bluetooth, WiFi, 1x Analog headset jack
For full JDSU T-BERD 5800 4146 SM MM Fiber OTDR product specifications, please click here:
JDSU T-BERD 5800 4146
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management