EXFO FTB-1 V2 PRO-S1-128G MAINFRAME W\ FTBX-8880 POWER BLAZER 10G TEST MODULE

Description

SERIOUS BUYERS ONLY!
PLEASE READ STORE DETAILS CAREFULLY!
*** NEW OPEN BOX ***
EXFO FTB-1 V2 PRO-S1-128G MAINFRAME WITH FTBX-8880 POWER BLAZER 10G TEST MODULE
FTB-1V2-PRO-S1-128G
WITH STANDARD DISPLAY AND 128GB OF INTERNAL FLASH MEMORY AND 2 X SFP+ PORTS
COMES WITH FOLLOWING SFP ADAPTERS
10G SFP+ SR 300M, 850NM LC-DUPLEX MULTIMEODE (1/10G ETH, 8/10G FC - FLEXOPTIX P.8596.02)
10G SFP+ LR 10KM, 1310NM, LC-DUPLEX, SINGLEMODE (1/10G ETH, 8/10G FC - FLEXOPTIX P.1396.10)
10G SFP+ ER 40KM, 1550NM, LC-DUPLEX, SINGLEMODE
(1/10G ETH, 8/10G FC - FLEXOPTIX P.1596.40)
THE MODULE HAS THE FOLLOWING:
BBU-EMULATION, IORF, NETBLAZER, OPTICALRF
THIS UNIT ALSO HAVE THE FOLLOWING LICENSES ACTIVATED:
PLATFORM:
RF: ENABLES YOU TO WORK WITH WIFI AND BLUETOOTH
FTBx-8880 MODULE OPTIONS:
SDH: SYNCHRONOUS DIGITAL HIERARCHY
SONET: SYNCHRONOUS OPTICAL NETWORK
10G_LAN: ETHERNET 10G LAN OPTICAL INTERFACE
10G_WAN: ETHERNET 10G WAN OPTICAL INTERFACE
GIGE_OPTICAL: ETHERNET 1000BASE-X (OPTICAL) INTERFACE
GIGE_ELECTRICAL: ETHERNET 1000BASE-T (ELECTRICAL) INTERFACE
100ELECTRICAL: ETHERNET 100BASE-TX (ELECTRICAL) INTERFACE
10ELECTRICAL: ETHERNET 10BASE-T (ELECTRICAL) INTERFACE
52M: 52Mbit/s
Item Details:
Manufacturer:
EXFO
Description:
Key features
Connects anywhere: USB, mobile, WiFi, VPN and Bluetooth
Loaded with utilities: all the tools required to maximize field testing, plus any third-party applications
Like a PC: available with dual- or quad-core processor and Windows operating system
EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database
Single- or dual-carrier configuration available to slot compatible FTBx test modules.
High-power two-slot carrier configuration enabling simultaneous 100G quad port testing
Complete and agile testing of 10G services
From development in the lab to troubleshooting in the field, EXFO’s FTBx-8870/8880 Power Blazer features a full suite of test capabilities with a range of technologies up to 10G.
Key DSn/PDH and SONET/SDH
Preconfigure user-defined bit-error-rate (BER) thresholds prior to running tests. Results are easy to interpret thanks to a simple pass/fail verdict at the conclusion of tests.
Key Ethernet features
Intelligent network discovery mode enables you to single-handedly scan the network and connect to any available EXFO datacom remote tester, with no need for an additional technician at the far-end to relay information.
Smart Loopback functionality offers five distinct loopback modes adjusting to all unique loopback situations.
Dual-port testing makes it possible for a single technician to launch EtherSAM or RFC 2544 tests using a single module and to obtain bidirectional results.
Support for virtual-local-area-network (VLAN) tags, Q-in-Q VLAN tags and multiprotocol label switching (MPLS) to enhance security, scalability, reliability and performance.
EtherSAM: the new standard in Ethernet testing
EXFO’s EtherSAM test suite—based on the ITU-T Y.1564 Ethernet service activation methodology—provides comprehensive field testing for mobile backhaul and commercial services, including critical service-level agreement (SLA) criteria such as packet jitter and quality-of-service (QoS) measurements.
EtherSam bidirectional results
Key SLA parameters are measured independently in each test direction, providing 100% first-time-right service activation—the highest level of confidence in service testing.
EtherSAM service configuration test
Sequential testing of each service to validate that it is properly provisioned and that all specific key performance indicators (KPIs) or SLA parameters have been met.
EtherSAM service performance test
Once the configuration of each individual service has been validated, the service performance test simultaneously validates the quality of all the services over time.
EtherSAM bidirectional results
Executes the complete ITU-T Y.1564 test with bidirectional measurements.
Key SLA parameters are measured independently in each test direction for 100% first-time-right service activation.
iSAM: simplified Y.1564 (EtherSAM) and RFC 6349 testing
With iSAM, the emphasis is on minimalism and simplicity, making both the Y.1564 (EtherSAM) and RFC 6349 testing methodologies as straightforward as possible for all users.
Only a small number of steps are required to set up, run and receive valid test results.
One-page setup facilitates the setup and running of iSAM tests for field technicians of all skill levels.
Cable test with power over Ethernet (PoE)
Technicians can troubleshoot any cabling or installation issue by checking the cable’s actual pin-out, wire map, cable length, distance-to-fault measurement and propagation delay.
Adding PoE means technicians can check for the following: presence of power, the power-supply equipment type, power class rating, voltage, current and power in watts.
FTTA Testing
The FTBx-8870/8800 CPRI protocol feature verifies that a remote radio head (RRH) is fully operational and that the correct small form-factor pluggable (SFP) transceivers are installed and properly connected.
With the layer-2 CPRI protocol, technicians can easily connect to the RRH without having to climb the cell tower.
Once connected to the RRH, the Power Blazer is able to supply the technician with a complete analysis of vital CPRI statistics.
Traffic generation and monitoring
Technicians can configure up to 32 streams of traffic in order to test just about any frame format including: Ethernet II, 802.3, SNAP, IPv4, IPv6, three levels of VLANs, MPLS, UDP and TCP.
A new virtual frame display that allows field technicians to easily configure multiple streams and their parameters makes it possible to test layer-2 protocols, including: Cisco discover protocol (CDP), VLAN trunking protocol (VTP) and link-layer discovery protocols (LLDP)
RFC 6349 service activation methodology
RFC 6349 validates end-to end TCP services and helps correctly locate and diagnose issues as they arise.
The RFC 6349 test helps resolve discrepancies between service-provider networks and customer premise equipment through:
Maximum-transmission-unit (MTU) size discovery
Baseline round-trip delay determination
Single or multiple TCP connections to enable full pipe testing
Carrier Ethernet operations, administration and maintenance (OAM)
The FTBx-8870/8880 adds extra packet-capturing capabilities, including comprehensive filtering, triggering and truncation methods to target specific traffic and quickly pinpoint issues in the lab and in the field.
Advanced traffic filtering using up to four fields and operands makes it possible to troubleshoot a particular traffic flow.
Performance assessment of Fibre Channel services
Since most storage area networks (SANs) cover large distances, and because Fibre Channel has stringent performance requirements, it is imperative to test each phase of network deployments to ensure appropriate service levels. In addition to full wire-speed traffic generation at the FC2 layer, the FTX-8870/8880 modules also support:
Proper characterization of latency for FC services.
Buffer-to-buffer credit estimation, a configuration parameter that estimates buffer credit values with respect to latency by calculating the distance according to round-trip latency times.
Switch-fabric login capability to support connections to a remote location through a fabric or semitransparent network.
FTBX-8880 Features:
The EXFO FTBx-8870/8880 Power Blazer 10G Multiservice Test Modules feature a full suite of test capabilities with a range of technologies up to 10G. The EXFO FTBx-8870/8880 line consists of versatile 10G multiservice test modules for lab and field applications. Key DSn/PDH and SONET/SDH capabilities allow users to preconfigure user-defined bit-error-rate (BER) thresholds prior to running tests. Results are easy to interpret thanks to a simple pass/fail verdict at the conclusion of tests. With the EXFO FTBx-8870/8880, intelligent network discovery mode enables you to single-handedly scan the network and connect to any available EXFO datacom remote tester, with no need for an additional technician at the far-end to relay information. EXFO’s EtherSAM test suite—based on the ITU-T Y.1564 Ethernet service activation methodology—provides comprehensive field testing for mobile backhaul and commercial services, including critical service-level agreement (SLA) criteria such as packet jitter and quality-of-service (QoS) measurements.
Full range of optical interfaces for different test scenarios
Complete suite of test functionality to address multiple technologies, including OTN, Ethernet, SONET/SDH,
Dual-port Ethernet testing capability up to 10GE
Unprecedented testing simplicity requiring minimal training for new users and maintaining a consistent experience
Offers EXFO TFv—Test Function Virtualization, including FTB Anywhere floating licenses and FTB OnDemand time-based
Compatible with EXFO’s LTB-8 Rackmount Platform featuring hot-swap capability for lab use
Compatible with the compact FTB-2 Pro Platform featuring integrated optical tools and battery operation capable of
Supported by EXFO Multilink, a web-based application for easy multi-user management and remote access
FTBx-8880 Specifications:
FTBx-8880 10Gbit/s Power Blazer Multi-Service Module
Features
Supports DSn/PDH, SONET/SDH up to 10Gbit/s, Fibre Channel 1,2,4,8,10X and Ethernet up to 10GigE LAN/WAN
Optical Interfaces
Optical reach will be determined by selected transceivers. Selection of multiple SFP and SFP+ is possible.
Electrical Interfaces
DS1/2M (E1) TX/RX: Bantam and RJ-48c connectors
2M (E1), DS3/34M (E3), E4: TX/RX BNC connectors
STS-1/STS-3c/STM-0e/STM-1e/140M: TX/RX BNC connectors
Single port 10/100/1000Base-T RJ-45 connector
Input/Output CLK DS1/2M: BNC/RJ48C/Bantam connector default & included options:
SONET-SDH
52M (OC-1/STM-0)
Quick reference guide (Hard Copy)
Test Report report (Hard Copy)
Any options and accessories with Included in place of a pricing.
Notes:
No rates or test interfaces enabled by default
At least one Transport rate option, Fibre Channel rate, or DSn/PDH option must be selected
MUST be used with a FTB-1v2-PRO-DC, FTB-2-PRO, FTB-4-PRO or an LTB-8 mainframe. When installed in an FTB-1v2-PRO-DC platform, this module runs the NetBlazer series software. Only software options associated with the NetBlazer series can be enabled in this configuration.
MUST select required SFP(s) for Optical interfaces
MUST select required SFP+(s) for 10G optical interfaces
Transceiver modules not included. Sold Separately.
Interface cables & Test jumpers not included. Sold separately.
Requires enabling at least one (1) Ethernet Rate option
FTBx-8880 Applications:
Key DSn/PDH and SONET/SDH
EtherSAM
iSAM: simplified Y.1564 (EtherSAM) and RFC 6349 testing
Cable test with power over Ethernet (PoE)
FTTA Testing
Traffic generation and monitoring
RFC 6349 service activation methodology
Carrier Ethernet operations, administration and maintenance (OAM)
Performance assessment of Fibre Channel services
Condition:
BRAND NEW
Auction Details:
Shipp
ing:
All
domestic
packages will be shipped out via Fedex, UPS, or USPS within the lower 48 states
Shipping to Hawaii and Alaska would be extra, and those shipments will be shipped out via USPS priority mail, unless otherwise stated in the auction or negotiated in emails.
Shipping to APO, RR, or PO box will be handled via USPS and would be extra on certain items, please email us prior bidding.
Goods will be dispatched the latest in
2
business days.
Goods will be shipped out after the holidays and weekends.
No local pick
ups accepted at this time, unless otherwise stated in the auction
Shipping costs are set at that price to cover some of our costs and packaging and handling fees as well as some of the ebay and paypal fees which add to about 13% of the total end price. Please don't email us to negotiate about the shipping costs.  We are extremely busy, so we might not answer your emails.
Shipping and handling fees are not negotiable, by bidding on this item the buyer agrees to pay for all the shipping costs
We ship to any destination in the world.
INTERNATIONAL BUYERS:
The International shipping rate is flat rate to most destinations in the world, please email us for additional information.
California buyers are subject to pay 9% tax.
International  buyers are responsible for all tax and custom duty charges outside the country.
Payment:
U.S. Buyers:
Credit cards through PayPal
Please note that we can't accept direct credit card payments at this time
International Buyers:
PayPal or Wire
Payment is due within 6 days of auction closing.
If payment is not received within this time unless otherwise stated or negotiated, item will be relisted on eBay.
Terms & Conditions:
After the auction is closed,
auction winners should contact us regarding any questions or requests.
After the auction is closed, payment should be received within 6 days.
Buyer has 30 days to return the product, return product should be brand new with all original accessories, buyer pays shipping costs.
Shipping and handling charges are not returnable
Items will be replaced or exchanged in case of DOA
If the same item or similar item is not in stock in case of DOA, the buyer will receive a refund back
We combine shipping to save customers money, however, there will be an additional charge per item, please read the description for each item to find out about the specific fees.
All buyers are subject to pay all taxes and duty fees inside and outside of the United States,
Our facilities are closed during the weekends and other holidays and there will be no shipments during these time periods. All packages will go out after the weekend or after the holidays.
Contact Information:
Please use ebay message