AFL Noyes C850 SM MM Quad Fiber OTDR w/ Power Meter & VFL C 850

Description

ebay template
The Following Items Are Included:
Noyes C850 SM MM Fiber OTDR (BC# 30215-L/T*)
SM OTDR Source:
1310nm
1550nm
MM OTDR Source:
850nm
1300nm
(5) SC Connectors
Power Meter:
850nm
1300nm
1310nm
1490nm
1550nm
1625nm
Visual Fault Locator
2.5mm Connector For VFL
(2) SM SC-SC Fiber Cables
(2) MM SC-SC Fiber Cables
AC Adapter/Charger
Power Cord
USB PC Interface Cable
User Manual On Cd-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Noyes C850 SM 1310 / 1550nm MM 850 / 1300nm Fiber OTDR w/ Power Meter & VFL
Dynamic Range:
1310 / 1550 nm : 26 / 26 dB
850 / 1300 nm : 22 / 22 dB
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
Visual Fault Locator
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
Noyes C850 SM MM Fiber OTDR
Features:
Full Auto, Expert and Real-Time OTDR test modes
Large transflective (indoor/outdoor) touch screen display
Create professional certification reports
Perform Pass/Fail Event and Link measurements
Find faults using integrated Visual Fault Locator
Save loss or power measurements
Use as single-mode laser or multimode LED source
The Noyes C850 from AFL Telecommunications is a full-featured QUAD OTDR in a compact case with a large transflective touch screen display suitable for both indoor and outdoor operation. The C850 offers built-in auto test functionality when used with another C850 or the C840 QUAD Certification Tester. The C850 features MM and SM OTDR capabilities, both single-mode and multimode Optical Light Sources (OLS), Visual Fault Locator (VFL, 650 nm), and an Optical Power Meter (OPM). As an OTDR, the C850 supports Full Auto, Expert (manual) and Real-Time test modes, simultaneous dual and single wavelength testing, and Event and Pass/Fail analysis based on default or user-defined thresholds. Two C850s or a C840 Tester and C850 can be used together to perform Tier 1 dual wavelength MM (850/1300 nm) and SM (1310/1550 nm) auto tests of one or two fibers in one or both directions; and measure both loss and length of the fibers and compare to industry standards (TIA/ISO/EN), applications and userdefined thresholds values to certify the fibers. The user may test two fibers at two wavelengths bi-directionally and store the results into the main unit. Featuring rich file naming, the Job setup wizard allows the user to define both the cable and fiber end locations, creating easily identifiable trace files, which are managed into Job and Cable folders.
Applications
Tier 1 and Tier 2 testing of premise networks
Fast fault location
Splice verification
Network documentation
Measure loss and length of fiber links
Certify fibers using Pass/Fail criteria of industry standards, applications and user-defined limits
Features:
22 dB (MM), 26 dB (SM) dynamic range (OTDR)
LED 850/1300 nm and Laser 1310/1550 nm sources (OLS)
Integrated OPM and VFL (650 nm)
Transflective (indoor/outdoor) touch screen display
Tool-free, switchable adapters
Rechargeable Li-Ion battery (> 8 hours) or AC power
USB host and function ports
Bellcore (GR-196) .SOR file format
Internal (1000s test results) and USB storage
Wave ID detect if used with Noyes Wave ID series light sources
Windows® compatible software
Specifications:
OTDR
Multimode
Single-mode
Emitter Type
Laser
Safety Class
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Center Wavelengths
850/1300 nm
1310/1550 nm
Wavelength Tolerance
± 20/30 nm
± 20/30 nm
Dynamic Range (SNR = 1)
22 dB
26 dB
Event Dead Zone
1.5 m
Attenuation Dead Zone
9 m
Range Settings
250 m to 64 km
250 m to 208 km
Distance Sampling Points
Up to 16,000
Data Point Spacing
0.25 m (range 4 km), Range/16000 (range 8 km)
Group Index of Refraction (GIR)
1.4000 to 1.6000
Distance Uncertainty (m)
± (1 + 0.005% x distance + data point spacing)
Loss Measurement Accuracy (linearity)
± 0.05 dB/dB
Light Source
Multimode port
Single-mode port
Available Wavelengths
850/1300 ± 30 nm
1310/1550 ± 30 nm
Emitter Type
LED
Laser
Safety Class
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Output Power
> - 20 dBm, 62.5µm MM
0 dBm, 9µm SM
Stability (after 15 minutes warm up)
± 0.1 dB over 1 hour
± 0.07 dB over 1 hour ± 0.15 dB over 8 hours
Wave ID Transmit
Yes
Tone Generation
270 Hz, 330 Hz, 1 kHz, 2 kHz
Visual Fault Locator
Emitter Type
Laser
Safety Class
Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Wavelength
650 nm
Output Power (nominal)
0.8 mW
Power Meter
Calibrated Wavelengths
850, 980, 1300 1310, 1490, 1550, 1625 nm
Detector Type
InGaAs 2mm
Measurement Range
+6 to -60 dBm
Accuracy
±0.25
Measurement Units
dB, dBm, mW
Wavelength ID
Yes (to -47 dBm)
Set Reference
Yes
Data Storage
Yes
Tone Detection
Yes (to -47 dBm)
General
C850 OTDR
Test Modes
OTDR (Full Auto, Expert, Real-Time), Auto Test, OPM, OLS, VFL
Trace File Format
SR-4731 (GR-196-CORE Appendix A, B; SR-4731)
Length Measurement Range
5 km (MM); 200 km (SM)
Data Storage
Internal flash memory
USB flash drive (2.0)
Downloadable from unit directly to PC
Data Storage Capacity
Internal > 1000 fibers
Data Transfer to PC
USB
Tool Free Adapters
Modular cleanable SC/ST/LC
Size
27.4 x 19.3 x 7.1 cm (10.8 x 7.6 x 2.8 in)
Weight
2.3 kg ( 5 lb)
Operating Temperature
-10 to +50°C, 0 to 90% RH (non-condensing)
Storage Temperature
-20 to +60°C, 0 to 90% RH (non-condensing)
Power
Rechargeable Li-Ion or AC power adapter
Battery Life
> 8 hours continuous testing
Recharge Time
4 hours
Display
16.51 cm (6.5 in), color, transflective
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management