5.6inch Optical Time Domain Reflectometer 1310/1550nm w/VFL OTDR MT-7300 Plus

Description

Model: MT-7300 Plus
●
5.6 inch color LCD
(touch screen)
● 38dB high dynamic range
● ≤2m extra-short event dead zone
● 0.05m high distance resolution,128k sampling points
● Fast auto measurement, one-button operating
● Test up to four wavelengths with a single unit
● Communication light check automatically
● Remote function via Ethernet
● USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync
● Supporting Bellcore GR196 file format in writing or reading
● Built-in lithium battery with high capacity for over 8 hours of operating life
● Integrated Visible fault locating (VFL)
Description
●  Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
●  Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
●  Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
●  Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
●  FTTx online testing, able to identify the splitter and the fiber’s end.
●  Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours.
●  Bellcore file format (.sor), with the storage of greater than 10,000 traces.
●  Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.
●  Connection State Detection: To promptly know the connection status of the instrumentation and the fiber for test.
●  The Switching of Measurement Mode: Through the shortcut key operation, it can achieve the flexible switching of real-time measurement mode and average measurement mode.
OTDR Traces Manager PC software
●  To achieve easily the function of bulk amendment and batch printing.
●  Able to generate different forms of test reports according to user needs.
●  To provide various flexible printing modes: The single-page single-trace printing mode, the batch printing mode, the single-page multi-trace printing mode, the printing mode of multi-waveform display. To provide the personalized selection of printing options and page setup.
●  The Function of Waveform Difference Comparison: It can open several waveforms in the same window, making more easily the comparison of parameter change caused by fiber aging or other reasons.
Technical   Specifications
MT-7300 Plus
Wavelength (nm)
850/1300
1310/1550
1310/1490/1550
1625
Dynamic range (dB)
2
23/21
32/30
34/32
36/34
38/36
34/32/32
38/36/36
30
4
32
5
34
4
36
5
Pulse width (ns)
5,20,40,80,160,320,640,1280
5,20,40,80,160,320,640,1280,2560,5120,10240,20480
Event dead zone (m)
3
2m
2m
Attenuation dead  zone (m)
3
9m
9m
Linearity (dB/dB)
±0.05 dB/ dB
Loss threshold (dB)
0.05
Loss resolution ratio (dB)
0.01
Sampling resolution ratio (m)
0.125 to 8
Sampling point
32K
Distance uncertainty  (m)
±(1 m + 5×10
-5
×   distance + sampling interval)
Distance scope (km)
0.3 to180
Typical real-time refreshing duration (s)
0.2
Memory capacity of trace
SD Card (2G), > 10000 pieces
Duration of measurement
Defined by user; 5sec, 10sec, 15sec, 30sec,   1min, 2min, and 3min are selectable
General   specification
Interface   category
Dimension (H×W×D)
150×235×66
Optical interface
FC/UPC (PC, and APC are selectable)
Weight
1.5kg
Data interface
USB interface, SD card interface
Temperature
Running temperature -10
℃
to 50
℃
Memory temperature -40
℃
to 70
℃
Visible   failure orientation VFL
Relative humidity
0% to 95% (non condensation)
Wavelength
650nm
Power supply
Lithium battery; continuing working   duration ≥ 8 hours
Output power (dBm)
≥-3
Warranty period
12 months
Maximum testing distance
3km
Remarks:
1. The technical specification   describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.
2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by   the minimum pulse width.
4. Dynamic range measured when there is filter.
5. Dynamic range measured when there is no filter.
⭐
De
livery
All the items will be dispatched within 1-4 business day by Airmail Post after the payment is clear.
Standard shipping service :Items will arrive in 8-20 business days.
Expedited shipping service Items will arrive in 4-1
2 business days.
International shipping takes time and your patience is highly appreciated.The arrival time depends on some factors and different areas
.
Note:
Expedited
shipping service does not include delivery to remote areas.
If you need to use express delivery to send items to remote areas, you need to pay an additional service fee for remote areas, usually about US to US.
Judgment in remote areas is based on information published by the express company.
⭐
Customs duty
Customs duty is obligation and liability of a citizen in your country, so buyer should be responsible for any tax and custom duty incurred.
For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase.
Or, we will
N
OT
be responsible for any failure delivery related destination customs issue.
⭐
Feedback & Contact us
If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Our aim is With Sincere Service In Exchange For You Once Again To Visit, normally so we will try our best to solve any problem.